Jump to content
Corsair Community

New build, P45 Platinum & cm2x1024-8500c5d


akink

Recommended Posts

I have just finished building a new computer with a MSI P45 Platinum and CM2X1024-8500C5D x2. I can go into the bios and load either defaults or optimized settings and boot successfully to win vista 32bit home premium. I can run memtest with no errors. I shut the computer down and have to re-set the bios before it will boot at all. It hangs checking the memory if I do not reset the bios. I had an Asus mb before this which did the same thing and was a couple of memory timing issues that fixed it. Any help would be appreciated.
Link to comment
Share on other sites

  • Corsair Employees

I would suspect you are missing some setting to save the settings properly and would check with the MB maker to help you with their BIOS settings and how to properly save them.

And you can get the tested settings from the link in my signature.

Link to comment
Share on other sites

If I change the FSB/DRAM ratio down to make the DRAM frequency around 800mhz (bios sets it at 1066mhz), the MOBO boots successfully. What are your thoughts on this. Are there other settings preventing the memory from running at 1066mhz?
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...