Jump to content
Corsair Community

Memtest errors, ASUS P5Q Deluxe and TWIN2X4096-8500C5DF


TomT_SS

Recommended Posts

Help! I am very frustrated. I am getting memtest errors on my ASUS p5Q Deluxe with TWIN2X4096-8500C5DF. I have the Ram voltage set to 2.1 V in the BIOS, manually selected 1066 mhz and manually set the timings to 5-5-5-18.

 

Are there any other settings I should tweak?

Link to comment
Share on other sites

I tested the modules individually and both seem fine. However, when I have both installed, I consistently get an error from whichever module is in the second slot -- I have tried swapping the order an both fail at the same address in the 2-4 gb space.

 

Does this suggest any BIOS changes to try?

Link to comment
Share on other sites

Possibly, but it's probably a slot or memory controller issue. Test one stick at a time in a different slot.

 

Yes -- both sticks work fine when tested one stick at a time but I get errors when both are simultaneously installed. The errors appear to always arise from the second slot.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...