Jump to content
Corsair Community

slow computer


freshfresh

Recommended Posts

I just built the following computer and very slow on boot and respond sluggish.

I have tried reinstalling the software and looked for settings to set it up and i have had no luck in my searches so i am posting my spec and hope anyone can give me some direction..

 

WANTING TO COMFIG MY SYSTEM TO GET THE MOST OUT OF IT.

Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 1.9-2.1 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.

 

Please note if they pass but you still have that problem you will either have a software problem or you may have a failing CPU.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...