iammike2400 Posted October 2, 2008 Share Posted October 2, 2008 Need spec and info for corsair TWIN2X4096-8500C5DF Information requested: Is this memory part of the XMS, XMS3, DHX, XMS3, XMS2, DHX, XMS2 Pro, XMS2, or XMS product line? Is the memory capable of bank interleaving? What is the channel interlaving XOR of Address bit? Should MemClk Tristate C3/ATLVID for the memory? Should the mememory's hole remapping be enabled? What's the most appropriate setting its read delay? What's its DCQ Bypass Maximum Also need the folling values: CAS LATENCY (CL) TCWL TRCD TRP TRAS tWR tRFC0 tRFC1 tRFC2 tRFC3 TRC TRRD tWTR tRTP The specs for Corsairs products should be more easily avialbe for view as are the competitors'. EDIT: Your forum name has been changed as it was a violation of forum rules. Link to comment Share on other sites More sharing options...
DerekT Posted October 2, 2008 Share Posted October 2, 2008 LMAO Q: Hi, I think you don't know how to do things right. Now can you help me? LMAO :roll: A: Uh, no, nothing here but us bad forum purveyors. You posted questions that clearly show you know nothing of what you are asking. Google is your friend. Perhaps you will like the Google search function better than this forum. Don't let the door hit your A$$ on the way out. By the way, I am just a simple member here and as such, can tell you what I think and only get a warning. If I worked for Corsair I couldn't tell you that I think you are an A$$! Which I most certainly do! :D: http://media.urbandictionary.com/image/large/pwned-37722.jpg Link to comment Share on other sites More sharing options...
007bont Posted October 2, 2008 Share Posted October 2, 2008 Rofl Derek and sry wired ;) http://dl.glitter-graphics.net/pub/191/191241tbh8ay8jo6.jpg Link to comment Share on other sites More sharing options...
Yellowbeard Posted October 2, 2008 Share Posted October 2, 2008 As for your questions, most of what you are asking about is going to be dependent upon the memory controller so you will need to contact your MOBO vendor. These values change from board to board, from MCH to MCH, and sometimes even from one BIOS version to the next. And, our memory specifications are easy to find on our home page under the PRODUCTS tab: http://www.corsairmemory.com/ And, any bios settings not listed in those specifications are recommended to be left to AUTO or at MOBO defaults. More info here: http://www.techarp.com/show.aspx?fileID=18 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 2, 2008 Corsair Employees Share Posted October 2, 2008 By the way your user name was changed as it VIOLATED Forum rules! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.