Jump to content
Corsair Community

Dominator TWIN2X4096-8500C5DF and Gigabyte GA-EG45M mobo


cbw0033

Recommended Posts

  • Corsair Employees
Yes just Gigabyte make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.1 Volts (+.3 Volts with GB NB) then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...