Cryolan Posted September 13, 2008 Share Posted September 13, 2008 Hi, Ich habe mir die TW3X2G2133C9DF pc17000 2133mhz speicher gekauft. Ich habe sie in mein Striker 2 Extreme eingebaut, jedoch kann ich sie nicht auf die 2133mgz einstellen. Sobald ich den MB Standart Takt von 1333mhz ändere bootet der Rechner nicht mehr. Hat jemand ne Lösung? Gruß Cryolan Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted September 14, 2008 Corsair Employees Share Posted September 14, 2008 Hier ein Guide: IMPORTANT! Use black DIMM sockets ONLY DIMM #2 + DIMM #3 2nd and 4th away from CPU as failure to do so will most likely result in unstable system / BSOD during OS boot up or even lock-up during POST routine! CPU Multiplier – [ 8 X] FSB - Memory Clock Mode - [unlinked] x FSB - Memory Ratio - Auto FSB (QDR), MHz - [1600] Actual FSB (QDR), MHz – 1600.0 MEM (DDR), MHz - [2000] Actual MEM (QDR), MHz – 2133.0 P1 – [Enabled] P2 – [Enabled] Memory timing Setting – [Expert] tCL (CAS Latency) - [9] tRCD - [9] tRP - [9] tRAS - [24] Command Per Clock (CMD) - [2T] tRRD - [Auto] tRC -[Auto] tWR - [Auto] tWTR - [Auto] tFAW - [Auto] tREF - [Auto] CPU Core - [1.35000V] CPU FSB - [Auto] Memory - [1.90V] nForce SPP - [1.50V] nForce MCP - [Auto] GTLVREF Lane 0 - [Auto] GTLVREF Lane 1 - [Auto] GTLVREF Lane 2 - [Auto] GTLVREF Lane 3 - [Auto] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.