Jump to content
Corsair Community

Can i get more memory bandwidth?


lltfdaniel

Recommended Posts

To all is there anything i can do to enhance the performance between the ram and cpu because currently according to cpu-z my ram is running at 5:6 ratio and the timeings at 5-5-5-18, now i do not even have a clue to how well this ram performs if the timeings are tightened etc but according to the website i brought the ram from state the timeings of 5-5-5-12 now i don't have a clue what they are on about but i think it could do with how much you can tighten it so any support from you guys will be appreciated.
Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.0 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...