Biggles10 Posted September 7, 2008 Share Posted September 7, 2008 I am currently runing my set on a matched pair of CM2X1024-8500CSD. Just recently I have been having BSODs and other porblems with my system the system has been stable for over 8 months up until this point. All memory had been running at the correct speed and voltages. I have narrowed it down to a problem with the memory as far as I am aware. I have been unable to run memtest as my system will not boot into it, but have run repeated tests using the windows memory diagnostic tool and no matter which slot used, 1 stick from the matched pair fails the test every time. If this is an RMA do you need both sticks back or just the one throwing the faults. Many thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 8, 2008 Corsair Employees Share Posted September 8, 2008 We will want to get them both replaced, please use the On Line RMA Request Form and we will be happy to replace them. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.