MS-7125 Ram Upgrade Problem

[Sunco]

Hello,

i have an ms-7125 board from msi with 2x 512MB corsair rams, running in dual mode with no problems at all.

 

now i wanted to upgrade the memory and bought the Value select kit

with 2x 1GB bar (VS2GBKIT400C3).

 

After installing the bars correctly, my system turned unstable. a bluescreen appears for some sec. then the system reboots. when i reinstall the older bars, everything is fine.

 

i think i have to adjust the timings in my bios, but i got no idea which number or in which order.

[DerekT]

1. Shut the system down
   
2. Remove the power cord
   
3. Remove the CMOS Battery
   
4. Set the CMOS_CLR Jumper to On
   
5. Press the power button for 10 seconds
   
6. Let sit for 10 minutes
   
7. Set the CMOS_CLR Jumper to Off
   
8. Insert one stick of DRAM in Slot 1 (closest to the CPU) and Slot 3
   
9. Insert the CMOS Battery
   
10. Insert the Power Cord
    
11. Restart the system
    
12. Enter the BIOS
    
13. Load Default Settings
    
14. Save Default Settings and Exit
    
15. Restart the System