tootalluk Posted September 5, 2008 Share Posted September 5, 2008 Hi ive had my system running for 10 months or so 2 months ago i had problems and by removing 1 of the pairs this problem was resolved but this week the problem returned where the computer wouldnt boot even in to bios i have tried each moduel in slot 1 and 1 of each of the pairs fail to boot. I have an EVGA 680i sli mobo with all setting to auto and am now running with the 2 working sticks what do you recomend. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 5, 2008 Corsair Employees Share Posted September 5, 2008 Make sure you have the voltage set manually to 2.1 volts and if you have the same problems then lets get the set replaced. Please use the On Line RMA Request Form and we will be happy to replace them. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.