Killerbee Posted August 21, 2008 Share Posted August 21, 2008 I was wondering which tRD setting would suite my RAM the best? I know you can calculate tRD with DDR2 but I don't know if this method can also be applied to DDR3. At this moment I have set tRD at level 7 which means its equal to CAS latency. But is it possible to lower tRD to level 6 or is that a no-go area with DDR3? Thanks for your insights!!!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 22, 2008 Corsair Employees Share Posted August 22, 2008 Leave it at AUTO or BIOS default unless its other wise stated. Link to comment Share on other sites More sharing options...
Killerbee Posted September 21, 2008 Author Share Posted September 21, 2008 Thanks RAM GUY. Could you also tell me what the absolute max. voltage is to put on the modules? Is 2.0v the absolute max.? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 22, 2008 Corsair Employees Share Posted September 22, 2008 Yes max voltage for DDR3 would be 2.0 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.