gregcroz Posted August 21, 2008 Share Posted August 21, 2008 Will this combination work? The board is not listed in the memory configurator. Here are the specs: Intel® Core™2 Quad, Core™2 Extreme, Core™2 Duo, Pentium® Dual-Core, Pentium® Dual-Core processors, Socket T (LGA775) Supports Intel® next generation 45nm Multi-Core processors 1600(OC *)1333/1066/800 MHz (FSB) Dual channel DDR2 1066(OC *)/800/667 x 4 DIMMs, Max. 16GB 2 x PCIe2.0 x16, 2 x PCIe2.0 x1, 2 x PCI 1 x ATA133, 2 x 1394a, 6 x SATA II (3 GB/s), 1 x eSATA 7.1 channel HDA, Realtek® ALC888GR Gigabit LAN, Realtek® RTL8111B 12 USB 2.0 ports Kindly share any thoughts and suggestions. Thanks in advance Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 22, 2008 Corsair Employees Share Posted August 22, 2008 Yes they will run great on that MB but if you will use a 1600 FSB CPU you will need to use DDR800 memory minimum. Link to comment Share on other sites More sharing options...
gregcroz Posted August 22, 2008 Author Share Posted August 22, 2008 RamGuy Thanks for your speedy reply. Right now, the CPUs that I am considering have FSB 1333. In this regard, sounds like a go. Thanks again. Greg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 22, 2008 Corsair Employees Share Posted August 22, 2008 Yes you should be good to go! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.