Jump to content
Corsair Community

Subtimings for P35-DS3P and CM2X2048-8500C5D


Recommended Posts

I'd be thankfull if someone could tell me the optimal timings for my ram since my board doesn't seem to recognise the EPP... options in my BIOS are:


ACT to ACT Delay (tRRD): ?

Rank write to READ Delay: ?

Write to Precharge Delay: ?

Read to Precharge: ?

Refresh to ACT Delay: ?

Static tRead Value: ?

Static tRead Phase Adjust: ?


Leave these settings at MOBO defaults. For the other settings, use the tested values for the memory found here: http://www.corsairmemory.com/products/dominator.aspx



CAS Latency Time: 5

DRAM RAS# to CAS# Delay: 5

DRAM RAS# Precharge: 5 -> 4 possible?

Precharge delay (tRAS): 15 -> 12 possible?

For these settings, if you want to run lower latencies than the tested settings, you'll need to try and test them yourself. I would suggest booting with Memtest first and if stable for 1 pass, then try the OS and Orthos Prime for 1+ hours.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...