decebal Posted August 20, 2008 Share Posted August 20, 2008 I am planning to buy 2 modules of these (TWIN2X4096-6400C4DHX or TWIN2X4096-6400C5DHX) but I want to be sure they are compatible with my MB.I have an Asus P5N E-SLI, and the memory configurator ( http://www.corsair.com/configurator/product_results.aspx?id=56586) it shows they are compatible. Thank You!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 20, 2008 Corsair Employees Share Posted August 20, 2008 Yes but With 4 modules DDR667 would be suggested and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.05 Volts. Link to comment Share on other sites More sharing options...
decebal Posted August 21, 2008 Author Share Posted August 21, 2008 Thank you! I do not plan to buy more.I more than enough 4 me:D. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 21, 2008 Corsair Employees Share Posted August 21, 2008 They will run great just load setup defaults and then set the tested settings and Voltage should be all you need to do. Link to comment Share on other sites More sharing options...
decebal Posted August 28, 2008 Author Share Posted August 28, 2008 I have 2 modules (TWIN2X4096-6400C4DHX) of 2Gb each. I installed them but they are working in 5-5-5-18-23 with the auto setup in BIOS. How do I make them working at their speed? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 28, 2008 Corsair Employees Share Posted August 28, 2008 Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.1 Volts then set the timings manually to the tested settings for the specific module you have, Cas 4-4-4-12 (Cas, TRCD, TRP, TRAS)at 2T C/R / CPC should be all you need to set. Link to comment Share on other sites More sharing options...
decebal Posted August 28, 2008 Author Share Posted August 28, 2008 Yes thank you but is something else what bothers me ands about voltage.I never found the 2.1 v for the memory and what I mean is always between 2.083 and 2.173 something like that. i always chosen the closest one and is about 2.083,is it ok? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 28, 2008 Corsair Employees Share Posted August 28, 2008 Yes 2.083 should be fine most ASUS MB's over volt .05 Volts so that will be fine. Link to comment Share on other sites More sharing options...
decebal Posted August 29, 2008 Author Share Posted August 29, 2008 I`ve done that works great. Thank you!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 29, 2008 Corsair Employees Share Posted August 29, 2008 NP Please let me know if there are any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.