PinkFloyd08 Posted August 16, 2008 Share Posted August 16, 2008 I just replaced some faulty XMS2 DHX with two sets of 4gb of this stuff (TWIN2X4096-8500C5DF) Im quite new to system building and messing around in the Bios, I was wondering if I could get some help configuring it. [what should all my settings be in the BIOS] All my parts can be seen in my drop-down list. Just a note, my bios and everything is up to date. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 16, 2008 Corsair Employees Share Posted August 16, 2008 With 4 modules DDR667 or DDR800 would be suggested and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.05 Volts. Link to comment Share on other sites More sharing options...
PinkFloyd08 Posted August 16, 2008 Author Share Posted August 16, 2008 And I assume change the timings to 5-5-5-15? http://img233.imageshack.us/img233/6427/cpuzstatsju8.jpg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 16, 2008 Corsair Employees Share Posted August 16, 2008 There will be no difference between the TRAS at 15 or 18 but yes you can, I would leave it at Auto and see what is set first though. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.