Jump to content
Corsair Community

cmx512-3200C2 or cmx512-3200LL


davester

Recommended Posts

Hi, new to the forum, so please be gentle. I currently have an A7N8X Deluxe (rev 1.0X) happily running twinx512-3200LL in dual channel mode using spd (2226). I would like to go up to 1Gb retaining the dual channel mode. As the title of the post asks, do I go the LL or C2 ?? I searched these forums to no avail, The ASUS site [URL=http://www.asus.com/prog/spec.asp?m=A7N8X%20Deluxe]suggests[/URL] the c2 module. Any help appreciated, Cheers.
Link to comment
Share on other sites

I got the module you suggested and set the timings as requested. The memory speed has dropped from 200Mhz to 166Mhz. Should I run it at 166Mhz or 200Mhz? ASUS A7N8X-D Rev1.04 1007Uber BIOS XP2600+ Any replies appreciated.
Link to comment
Share on other sites

  • Corsair Employees
Yes you should run the memory Frequency at 100% or at the same frequency as the CPU. If you try to run the memory at DDR400 and the CPU at 333Mhz it will cause a bottleneck in the chipset and may generate errors that are not the fault of the memory!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...