techdunce Posted August 12, 2008 Share Posted August 12, 2008 Hello, and thanks for your time. Im wondering will the above mentioned psu give support for my motherboard. The board is Gigabyte GA-EP35c DSR3. It has P4 cpu power connector, and dont mind admitting, Im finding the specs a bit confusing. From what I can gather, the psu has an 8 pin connector, but does it have dual compatability with the p4? Thanks again,Techdunce :): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 13, 2008 Corsair Employees Share Posted August 13, 2008 The 8-pin connector on the PSU splits in half to give you the option of using it as either a 4-pin or and 8-pin. You should have no problem using the TX750 with that board. Link to comment Share on other sites More sharing options...
techdunce Posted August 13, 2008 Author Share Posted August 13, 2008 I thought that was the case, but as Im not as well read on the subject as I should like, or as familiar with the terminology, I just had to ask. Very happy with the reply too, psu is ordered based on that, all the best,Techdunce:): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 13, 2008 Corsair Employees Share Posted August 13, 2008 Thanks for the reply, let us know if you have any more questions! Link to comment Share on other sites More sharing options...
techdunce Posted August 13, 2008 Author Share Posted August 13, 2008 Will do, thanks again,Techdunce:): Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.