NickMDal Posted August 11, 2008 Share Posted August 11, 2008 Have been running 2g Corsair CM2X1024-8500CSD @ 1066 for months without problems - except one. Photoshop CS2 freezes (certain of no app problem). Anyone know the officially correct memory config for this memory running at 1066? Link to comment Share on other sites More sharing options...
007bont Posted August 11, 2008 Share Posted August 11, 2008 settings can be found here: TWIN2X2048-8500C5DF Link to comment Share on other sites More sharing options...
NickMDal Posted August 12, 2008 Author Share Posted August 12, 2008 Thanks! Very helpful. :): (thought I posted this already :confused:) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 12, 2008 Corsair Employees Share Posted August 12, 2008 Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.1 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.