DjPanda Posted August 9, 2008 Share Posted August 9, 2008 I have the TWIN2X2048-6400C4 set along with an Asus P5Q PRO... The machine itself is randomly rebooting/crashing which appears to be a memory timing issue... As it is the bios is on auto for the memory settings.. What should all the correct settings be for the Asus P5Q Pro and are there any known issues.... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 11, 2008 Corsair Employees Share Posted August 11, 2008 Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.1 volts (+.3 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.