Revisions help

[se7en]

i bought 2 stick of CMX512-3200C2 both were rev 1.2 one stick ended up bad i sent it back got a replacment. The new stick was rev 1.3 i ran AIDA32 and got this Bank 1 rev 1.2 Memory Module Properties: Module Name Corsair CMX512-3200C2 Serial Number None Module Size 512 MB (2 rows, 4 banks) Module Type Unbuffered Memory Type DDR SDRAM Memory Speed PC3200 (200 MHz) Module Width 64 bit Module Voltage SSTL 2.5 Error Detection Method None Refresh Rate Reduced (7.8 us), Self-Refresh Highest CAS Latency 2.5 (5.0 ns @ 200 MHz) 2nd Highest CAS Latency 2.0 (6.0 ns @ 166 MHz) bank 2 rev 1.3 Memory Module Properties: Module Name Corsair CMX512-3200C2 Serial Number None Module Size 512 MB (2 rows, 4 banks) Module Type Unbuffered Memory Type DDR SDRAM Memory Speed PC3200 (200 MHz) Module Width 64 bit Module Voltage SSTL 2.5 Error Detection Method None Refresh Rate Reduced (7.8 us), Self-Refresh Highest CAS Latency 3.0 (5.0 ns @ 200 MHz) The fastest timing i can get is 2.5-3-3-6 at V2.75 i wonder why i can't get the rated speed of 2-3-3-6 what is the revision differances? My spec are Asus P4P800 deluxe P4 3.0C HT 2x CMX512-3200C2 Sapphire Radeon 9800Pro 128ram 2xMaxtor 120GB 7200RPM Sony CD-RW 32x/10x/48x Memorex 48x CDrom

[RAM GUY]

With 2 single modules the suggested settings would be Cass 2.5-3-3-7. Only out Twinx sets would be guaranteed at the rated speed 2 up. Sorry, but we can only guarantee what we test.

[se7en]

so does having the setting at 2.5-3-3-6 hurt anything or should they be at 2.5-3-3-7 thanks

[RAM GUY]

If you sustem is stable at thise settings, I would leave it there! To be sure let if run [url]www.memtest.org[/url] for a few hours!