Jump to content
Corsair Community

Abit KD7 and TWINX2048RE-3200


vhync

Recommended Posts

Could I use TWINX2048RE-3200 on my Abit KD7? until I upgrade to an Opteron/64FX in 2 to 3 months time (hopefully). The manual states that up to 3GB of registered PC3200 is supported. Also Abit has a FAQ answered with this "KD7 can boot up with ECC memory modules installed, but without ECC function".
Link to comment
Share on other sites

  • Corsair Employees
Honestly, we would not have tested these modules with this MB! However, the chipset used with [URL=http://www.abit-usa.com/products/mb/products.php?categories=1&model=18]ABIT KD7[/URL], is made by [URL=http://www.via.com.tw/en/apollo/kt400.jsp]VIA KT400 Chipset[/URL] would support registered memory, however I am not sure if support was implemented in the MB layout. You might ask ABIT if they can test the MB as I do not have one that I would be able to verify if it's compatible.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...