IOZERO Posted March 21, 2004 Share Posted March 21, 2004 Hallo i'm Massimo from italy i have a some problem with my motherboard P4c800 Deluxe and my Corsair Memory TWINX1024-3200LLPT when i set by SPD all ok my computer work but when i set the timings 2-3-2-6 and volt 2,75 when restart my computer reset the bios and i reprogram with a floppy please help me Very thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 21, 2004 Corsair Employee Share Posted March 21, 2004 Please test the modules one at a time with [url]www.memtest.org[/url], in addition please disable legacy USB support when running this program. If you do find one is failing please contact your reseller and ask them to help you get them replaced. If they refuse or cannot help you then please follow the link in my signature and we will be happy to replace them for you. Should they both test with out errors one up, that would suggest some other problem, and testing them on another MB or system would be suggested. Link to comment Share on other sites More sharing options...
IOZERO Posted March 22, 2004 Author Share Posted March 22, 2004 Work only with timing 2-3-3-6 i have test with MEMTEST each bank in all slot but only one work with timing 2-3-3-6 without error Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 22, 2004 Corsair Employee Share Posted March 22, 2004 Please make sure you disabled Legacy USB support and set the Dim Voltage to 2.75 Volts! Link to comment Share on other sites More sharing options...
IOZERO Posted March 22, 2004 Author Share Posted March 22, 2004 yes i have disable usb... and i have set voltage 2.75 before run the test Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 23, 2004 Corsair Employee Share Posted March 23, 2004 O.K. So are you saying one module works and one does not? Link to comment Share on other sites More sharing options...
IOZERO Posted March 23, 2004 Author Share Posted March 23, 2004 yes one work and one not work Link to comment Share on other sites More sharing options...
IOZERO Posted March 23, 2004 Author Share Posted March 23, 2004 With 2-3-2-6 volt 2,75 my computer not boot With 2-3-3-6 volt 2,75 my computer boot First DDR mem test ok Second DDR mem test show error I have tested with usb legacy disable in all DDR sockets. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 23, 2004 Corsair Employee Share Posted March 23, 2004 Please talk to your reseller to see if they can help you get these replaced. If not, please follow the link in my signature, and we will be happy to replace them. Link to comment Share on other sites More sharing options...
IOZERO Posted March 23, 2004 Author Share Posted March 23, 2004 Ok very thanks for your service. Massimo Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 23, 2004 Corsair Employee Share Posted March 23, 2004 Please let me know how you make out! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.