Jump to content
Corsair Community

XMS Pro pc3200 frequency and CL settings


Donald

Recommended Posts

[In checking the bios of my new system the memory frequency is set( in auto) at 266mhz in the dram timing control section. I am using pc3200 XMSPRO memory(2 sticks of 512mb ddr). CL is set at 2.5. Shouldn't the frequency be set at 200 and CL at 2.0? What will happen if I leave it at the current settings?
Link to comment
Share on other sites

  • Corsair Employees
Your current settings are not running at optimized speeds. The CAS Latencies should be: SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T DRAM Frequency: 200 mhz If you have any other questions please let me know. Thanks!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...