Jump to content
Corsair Community

Proper settings - ASUS P5N32E-SLI


delpro

Recommended Posts

Apologies in advance if this has been asked/ansered previously. I've seen similar threads but nothing dead on ..

 

I've got an ASUS P5N32E-SLI motherboard (680i chipset) with 2 sets of TWIN2X4096-6400C4DHX installed (total of 4 sticks = 8 gig). I've gone into the bios and set the mem voltage to 2.1v and the timing to 4-4-4-12.

 

I want to properly time/power these and note other instances (different dimms/mbs) where it is suggested that memory be clocked down to 667 when all 4 slots are filled. Is this the case in my situation as well? I am getting memtest errors, and was going to spend the time going through them one stick at at time, but now am thinking that my settings may need to be revised .. any advice?

 

thanks!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...