Jump to content
Corsair Community

need help


krazykraut

Recommended Posts

  • Corsair Employees
550vx works with paper clip,12.13v 3.13v onboardusb.
with paper clip method p/s fan didnt spin for about 30-45 sec

 

These statements contradict each other. What happens when you have the PSU plugged into the board and you hit the power button? Have you tried bypassing the power button and jumping the power pins manually?

Link to comment
Share on other sites

when i used the paper clip i turned off the psu after fan ran . then tried to start it up, and the small fan hooked up would move about 1/4 inch. could not get to start again.

dont have another sys. to check it with.

on switch has 3.17v with p/s hooked up. tried shorting on switch on board again nothing,

Link to comment
Share on other sites

  • Corsair Employees

If you believe it to be faulty, we have no problem replacing it for you. Please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.”

 

I would recommend finding another system to test it on, to be sure the PSU is the problem, and it is not an issue with an out of spec board triggering the OVP/OCP (overvoltage and overcurrent protection circuits).

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...