Jump to content
Corsair Community

CM2x1024-8500C5D won't boot at 1067mhz 5-5-5-15

Recommended Posts

Ok. I've tried everything. These things won't POST at 5-5-5-15 setting.



I have MSI P35 Platinum bios v1.8

E6750 at 333x8. 2.6ghz


They are 4.1v and have rating of 2.2v on the RAM itself.


tried bumping the voltage to 2.2v and still no go


On default mb setting with 2.2v it runs at 5-6-6-22


Computer won't even post at 5-5-5-15


tried booting with each chip by itself. neither will POST at 5-5-5-15 setting.


tech case created 503664

Link to comment
Share on other sites

  • Corsair Employees
It's very unlikely that both modules would have the same issues when tested individually, that would normally indicate that something else is causing the issues. Are you able to test the modules in a different system?
Link to comment
Share on other sites

any other way I can test these ram chips? I mean your compatibility page says these chips are compatible with my motherboard.


I really do not think my motherboard or anything else is the issue here.


When I had Twin2x XMS2 2x1gb cass4 chips I ran 24hour blend test at 487x7 with memmory 1:1 974Mhz and 4-4-4-12.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...