sublimejhn Posted February 21, 2008 Share Posted February 21, 2008 I just purchased the Corsair TWIN2X2048-6400C4 ram for a friend's build. Unfortunately the mobo I bought only goes up to 2.0v for the vdimm. Since the ram is rated at cas lat 4, I figured it would be able to run just fine at a latency of 5 with only the 2.0v. I was getting random reboots, so I ran memtest and after messing with that for a while I have found that at 5-5-5-15 @ 2v one stick is stable, but the other errors out. My question is, do yo think I should get an RMA, or is it most likely the voltage? I can toss it in one of my computers and up it to 2.1v at 4-4-4-12 to see if it errors out, but I would like to avoid that if I can because I really don't feel like messing with the overclocks I have on the other computers. So I just want to get some opinions of whether it is the ram or the voltage before I do anything. I think it is the ram, the one stick is fine and I highly doubt bumping the voltage .1v while dropping the cas latency is going to be ok when it gives numerous errors at cas lat 5 and 2v, but I'd like to see what others think. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 21, 2008 Corsair Employees Share Posted February 21, 2008 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.