thunder48 Posted February 20, 2008 Share Posted February 20, 2008 I need help to get my ram working on my Asus M3A32-MVP Deluxe WIFI it needs to be overclocked can't seem to get it running. 2.2 volt 5-5-5-15 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 21, 2008 Corsair Employees Share Posted February 21, 2008 Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.1 volts (+.3 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.