WeaponX Posted February 16, 2008 Share Posted February 16, 2008 As you can see, I have total of 4 modules. The first pair is v1.1 and the other is v1.3. Will there be any performance issue if I have the first pair into the blue memory slot and the second pair into the black slot or vice versa as one v1.3 and v1.1 in the same blue memory slot. Why there is different version of the same memory? Thank You, Q Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 20, 2008 Corsair Employees Share Posted February 20, 2008 As long as they are 1.X revision they are made with the same IC usually, but that would be a different BOM Bill of Materials. And for the slots you do not want to MIX them run them so the matching modules are in dual channel with each of it's matching module. With 4 modules you will likely have to set the memory frequency at DDR333. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.