Jump to content
Corsair Community

Striker Extreme & TWIN2X4096-6400C4DHX


Recommended Posts

Hi All,


My kit is coming tomorrow, and I want to reassure myself of the settings I have found on this forum. Only purchased 1 kit 2x2 = 4G, I think the settings are as follow...


1. running vista 64bit w/kb929777 patch

2. Timing: 4-4-4-12-2T, Trc-24(if needed) and voltage 2.1v

3. ddr667 or ddr800


Please refer to my rig spec for my system, and did I miss anything? or what else will you suggested?


note: future plans - add 1 more kit to 8G


Thanks in adv.

Link to comment
Share on other sites

Well I was not aware they were available they do list the part number as TWIN2X4096-6400C4DHX so you should be good to go. Cas 4-4-4-12 at 2.1 Volts would be the settings (TCL, TRCD, TRP, TRAS)


Thanks for the quick response, I'll post my result for better or for worst :biggrin:

Link to comment
Share on other sites

Good news!


Received version 1.1 from Newegg. Ran Memtest86+ v2.0 and no problem.


Tested w/ 5-5-5-18 2T @ 800 (did not try anything else)

Tested w/ 4-4-4-12 2T @ 800 & 840 (best I can do without tweaking the NB)

voltage set to 2.1v

everything else left on AUTO


Even with the above settings, my NB voltage read 1.36v under voltage monitoring in the bios.


Only marginal performance difference between the 2 RAMs: 2x1 Corsair pc2-8500c5d 1066 and 2x2 corsair pc2-6400c4d 800.


In the end, I settled with cpu 3Ghz, 4-4-4-12-2T 800Mhz vista 64bit score 5.6 on memory all others at 5.9


Tested under Everest Mem benchmark, attached my png files of the 2.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...