bardos Posted February 12, 2008 Share Posted February 12, 2008 this cable most likely gives 12 volts to the fan if connected to a molex connector. i am wondering first of all if it is possible to get 7 volts from the psu to power my 120mm fan. is this dangerous for the psu? thx. Link to comment Share on other sites More sharing options...
EliteKiller Posted February 12, 2008 Share Posted February 12, 2008 You can connect a 7V adapter cable to one of the modular 4 wire 4-pin (12V/5V/GRND) molex connectors. I would not use the 4-pin 12V Y-adapter fan only cable that ships with the psu. My recommendations http://www.svc.com/fsa-75.html http://www.svc.com/zm-fanmate2-75.html http://www.jab-tech.com/product.php?productid=2041 Link to comment Share on other sites More sharing options...
bardos Posted February 12, 2008 Author Share Posted February 12, 2008 You can connect a 7V adapter cable to one of the modular 4 wire 4-pin (12V/5V/GRND) molex connectors. I would not use the 4-pin 12V Y-adapter fan only cable that ships with the psu. My recommendations http://www.svc.com/fsa-75.html http://www.svc.com/zm-fanmate2-75.html http://www.jab-tech.com/product.php?productid=2041 thx, yes, i've set it up now thru a molex with a couple of solders and it works very well. any official formula to know how the 69 cfm and 36dba stats were downgraded in the switch from 12v to 7V? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.