spline3d Posted February 10, 2008 Share Posted February 10, 2008 Hi, I'm building a new system and am having stability problems with eVGA 650i ultra and CM2x2048-6400C5. I've purchase 2 sets of modules for a total of 8gb memory. I tried installing Vista 64 but couldn't complete the install as I kept getting BSODs. I tried setting the voltage in the bios from auto to 1.9...then 2.0, then 2.1...no good. I tried using some other memory that I had for another system and set the mem voltage to auto and it's performed just fine. What manual settings should I use? Thanks!!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 12, 2008 Corsair Employees Share Posted February 12, 2008 With 4 modules you should set the memory frequency at DDR667 and I would set the memory voltage to 2.0 Volts and see if it will get through 2 passes of http://www.memtest.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.