1337 Posted February 9, 2008 Share Posted February 9, 2008 TWIN2X4096-6400C5DHX GA-8I945GMMFY-RH Hello everybody, Now the mobo I've got here only supports 1.8v and 667Mhz, so would the kit in question from Corsair be backwards compatible and have maybe better timings? If I could make it run at least CL4 @ 667Mhz I would place an order straight away. Any feedback is most welcome. Thanks! Link to comment Share on other sites More sharing options...
bigbuck08 Posted February 10, 2008 Share Posted February 10, 2008 If should automatically run at 667 but why not just get 667 to begin with? Link to comment Share on other sites More sharing options...
1337 Posted February 10, 2008 Author Share Posted February 10, 2008 Well, I'd have liked to have CL4. Seems like neither C*r*u*c*i*a*l, nor Corsair do that kind of kits. Link to comment Share on other sites More sharing options...
Xtreeme Posted February 10, 2008 Share Posted February 10, 2008 I have the 2gb kit of same ram. Here is what everest says the timings are. @ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 22-42-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP) @ 270 MHz 4-4-4-13 (CL-RCD-RP-RAS) / 15-29-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP) Id think you should get better timings at lower speed, ya. I Know that ram will run at 1.8v since I built I gigabyte and q6600 combo with that exact ram kit last week. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.