Jump to content
Corsair Community

Help with memory timings..


mgfla2

Recommended Posts

Ok just got my new rig and have CMX512 (x2) 3200c2 pro xms memory in it.. Been playing around the some OCing and wanted to know what would be a decent setting for running my memory? I'm gonna OC the sustem probably just a bit..say 5 to 10 % I have a 3.0 p4 and will run most likely at 215-217 FSB at 1:1.. Want to squeeze as much out of it as i can :) Ohh yea and i have an Asus p4c800-e deluxe mb....
Link to comment
Share on other sites

  • 2 weeks later...
  • Corsair Employees
The rated timings for those modules are: SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T DIMM Voltage: 2.7X If you have any problems hitting the FSB you want, I would suggest lowering the CAS to 2.5. Then you should be able to hit the FSB you want.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...