ImagePree Posted February 8, 2008 Share Posted February 8, 2008 Hi Ramguy, I had one of these replace in 06. Click for thread Looks like the other stick has now gone bad. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 8, 2008 Corsair Employees Share Posted February 8, 2008 If you have memory voltage set correctly to 2.75 volts and the module is still failing then lets get it replaced. Please use the On Line RMA Request Form and we will be happy to replace it. Link to comment Share on other sites More sharing options...
ImagePree Posted February 8, 2008 Author Share Posted February 8, 2008 Voltage has always been at default levels. -with both sticks installed: BSOD after O/S boot -with faulty stick installed: instant BSOD after post -with good stick installed: no problems whatsoever I'll try setting the voltage as recommended when I get home today and we'll see. If still faulty, I'll RMA it. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 8, 2008 Corsair Employees Share Posted February 8, 2008 I'll try setting the voltage as recommended when I get home today and we'll see. If still faulty, I'll RMA it. Thanks. Sounds good! Link to comment Share on other sites More sharing options...
ImagePree Posted February 8, 2008 Author Share Posted February 8, 2008 Applied for RMA. Just tried with a machine here at the office. Won't even post. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 8, 2008 Corsair Employees Share Posted February 8, 2008 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.