falkenhagen Posted February 7, 2008 Share Posted February 7, 2008 Hello.... At the present moment, I have an ASUS P5W DH Deluxe Motherboard on my system, with a Core 2 Duo 1.8 Ghz processor. Installed in my motherboard are 2 Corsair Dominator RAM modules, 1 GB each, model No. "Corsair XMS2 Dominator Xtreme Performance TwinX Matched - Memory - 2 GB ( 2 x 1 GB ) - DIMM 240-pin - DDR II - 800 MHz / PC2-6400 - CL4 - unbuffered -". Right now I am living in Venezuela and getting the same exact RAM is difficult. The closest thing I can find is "Corsair XMS2 CM2X1024-6400C4", with 4-4-4-12 latency and 2.1v voltage. If I install those 4 1 GB modules. Will I get my entire 4 GB of RAM in Vista? Is the system going to work properly? Are the RAM modules compatible? I am asking because they are both C4, so maybe there's a chance. Any help would be apreciated. Thank you. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 7, 2008 Corsair Employees Share Posted February 7, 2008 With 4 modules you would most likely have to run them at DDR667 but yes they should work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.