Jump to content
Corsair Community

DDR400 running at DDR333


Recommended Posts

I have PC3200 in my system with the Abit VI7 mb and a P4 2.533 Ghz CPU. the memory is only running at 333 due to what i have been told is the chipset limitation. what can i do to tweak out the speed and performance of the memory in this situation??
Link to comment
Share on other sites

Change the FSB step by step until the DRAM Freq reach 400. In doing so will cause the core speed of P4 2.533 inceasing and causing more heat. If you rig capable of handling the temp in CPU to a good condition then you can bump up to 400 mHz with increasing core speed
Link to comment
Share on other sites

i found a setting in bios that allowed me to manually set the SPD, i changed it to DDR400 and it seems to run perfectly fine without changing the Processor speed, so is it a bunch of BS that i was being fed about a chipset incompatability? :eek:
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...