scarzy Posted February 1, 2008 Share Posted February 1, 2008 Could you please provide the settings needed for the following configuration? Abit IC7-G motherboard 2 x CMX512-3200C2PT v1.1 2 x CMX1024-3200C2PT v1.2 Pentium 4 - 3.2GHz / 800MHz FSB Would it be better to place the 1024 modules in the 1 and 3 slots and the 512 modules in slots 2 and 4 or vice versa? Thank you. Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 1, 2008 Share Posted February 1, 2008 Would it be better to place the 1024 modules in the 1 and 3 slots and the 512 modules in slots 2 and 4 or vice versa? Thank you. Yes, arrange them in the slots as you listed. Also, manually set the memory voltage to 2.7v or 2.8v if you have instability. Try them by setting the timings by SPD. If that is not stable, try 2.5,3,3,7 or 3,3,3,7, or 3,3,3,8, or 3,4,4,8. Try each step progressively if you have instability. Link to comment Share on other sites More sharing options...
scarzy Posted February 1, 2008 Author Share Posted February 1, 2008 Thank you for the quick response. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2008 Corsair Employees Share Posted February 1, 2008 NP Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.