Botas1 Posted January 30, 2008 Share Posted January 30, 2008 I want to get the best performance on my memory ram is 4 Gb in my asus striker extreme please helpme to set my SLI system now is runing 800 mhz only thanks..............a lot:confused::confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 30, 2008 Corsair Employees Share Posted January 30, 2008 With 4 modules I would suggest DDR667 but you can try these settings and test with http://www.memtest.org. Striker SLi ready: Disabled Memory Voltage: 2.1v NB Core Voltage: 1.4v TCL: 4 TRCD: 4 TRP: 4 TRAS: 12 Command Per Clock: 2 TRC: 24 Link to comment Share on other sites More sharing options...
Botas1 Posted January 31, 2008 Author Share Posted January 31, 2008 With 4 modules I would suggest DDR667 but you can try these settings and test with http://www.memtest.org. Striker SLi ready: Disabled Memory Voltage: 2.1v NB Core Voltage: 1.4v TCL: 4 TRCD: 4 TRP: 4 TRAS: 12 Command Per Clock: 2 TRC: 24 Thanks a lot you are the best let me do it.... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 31, 2008 Corsair Employees Share Posted January 31, 2008 NP Please do it and let me know how you make out! Link to comment Share on other sites More sharing options...
Botas1 Posted January 31, 2008 Author Share Posted January 31, 2008 NP Please do it and let me know how you make out! I am a online gamer CRYSIS)you think is better to leave only 2GB in sli for better performance because The changes didn't improve at all...what do you sugest.....change timing again ......or wath's your best advice ........:!:Thank's alot again Link to comment Share on other sites More sharing options...
Botas1 Posted January 31, 2008 Author Share Posted January 31, 2008 I am a online gamer CRYSIS)you think is better to leave only 2GB in sli for better performance because The changes didn't improve at all...what do you sugest.....change timing again ......or wath's your best advice ........:!:Thank's alot again I forgot to tell you my cpu is not overclocked...I prefer stock settings.....or you sugest somthing??? thanks again Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 31, 2008 Corsair Employees Share Posted January 31, 2008 You would get best performance with just Two modules. Link to comment Share on other sites More sharing options...
Botas1 Posted January 31, 2008 Author Share Posted January 31, 2008 You would get best performance with just Two modules. how should i leave the setting in Bios? if i leave Two modules only, should i enable sli memory or how is that? thanks for your help Bro.....:confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 31, 2008 Corsair Employees Share Posted January 31, 2008 The part number you have listed does not support SLI Ready so just set the timings manually to the tested settings and Voltage. Link to comment Share on other sites More sharing options...
Botas1 Posted January 31, 2008 Author Share Posted January 31, 2008 The part number you have listed does not support SLI Ready so just set the timings manually to the tested settings and Voltage. But in the package said sli ready???? Link to comment Share on other sites More sharing options...
Botas1 Posted February 1, 2008 Author Share Posted February 1, 2008 how should i leave the setting in Bios? if i leave Two modules only, should i enable sli memory or how is that? thanks for your help Bro.....:confused: the model is Domintor DDR2 XM2S6400C4D Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2008 Corsair Employees Share Posted February 1, 2008 Then it will support SLI ready settings with one set. But you stated Cas 5 in your list. And I would set the memory Voltage to 2.1 Volts and set the Command Rate to 2T and set the TRC to 24 and then set SLI ready Memory to CPU 0% for the settings. Link to comment Share on other sites More sharing options...
Botas1 Posted February 1, 2008 Author Share Posted February 1, 2008 Then it will support SLI ready settings with one set. But you stated Cas 5 in your list. And I would set the memory Voltage to 2.1 Volts and set the Command Rate to 2T and set the TRC to 24 and then set SLI readu Memory to CPU 0% for the settings. Sorry about it.....:p: Its a mistake ....what's about Timing goes auto and the others sli settings in Bios goes enable......?:laughing: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2008 Corsair Employees Share Posted February 1, 2008 I don't understand what you are asking! I would set the memory Voltage to 2.1 Volts and set the Command Rate to 2T and set the TRC to 24 and then set SLI Ready Memory to CPU 0% for the settings. Link to comment Share on other sites More sharing options...
Botas1 Posted February 1, 2008 Author Share Posted February 1, 2008 I am a online gamer CRYSIS)you think is better to leave only 2GB in sli for better performance because The changes didn't improve at all...what do you sugest.....change timing again ......or wath's your best advice ........:!:Thank's alot again Then What do you think is better? to leave 2 modules in SLI 2GB or leave 4 GB with 4 modules....And Do you think 2 GB is good for crysis game If you thinnk is better 4 gb ...Can you tell me the Timing, Voltage and Bios settings (My memory ram is Dominator DDR2 XM2S6400C4D) because I put the wrong info in my profile.....Thanks for everything :laughing: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2008 Corsair Employees Share Posted February 1, 2008 If you have a 32 Bit O.S. then 2 Gig would be best! Link to comment Share on other sites More sharing options...
Botas1 Posted February 2, 2008 Author Share Posted February 2, 2008 If you have a 32 Bit O.S. then 2 Gig would be best! Is Vista 64 Bit.....can you give me the settings in Bios Please.....:biggrin: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2008 Corsair Employees Share Posted February 2, 2008 You can look up the modules part number from the link in my siganture, but if you have more than two you might need to relax the frequency. Link to comment Share on other sites More sharing options...
Botas1 Posted February 2, 2008 Author Share Posted February 2, 2008 You can look up the modules part number from the link in my siganture, but if you have more than two you might need to relax the frequency. Thanks let me do it...You are the best :D: Link to comment Share on other sites More sharing options...
Botas1 Posted February 3, 2008 Author Share Posted February 3, 2008 Thanks let me do it...You are the best :D: I have another question I set the 4 Gb sticks 4,4,4,12 Vvoltage 2.1,T2, sli mem desabled....... everithing like you said only I left the memory speed 800mhz and is working ok, Should I leave it like this?????? :confused::confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 4, 2008 Corsair Employees Share Posted February 4, 2008 With 4 modules I would suggest setting the memory frequency at DDR667 with those settings. Link to comment Share on other sites More sharing options...
Botas1 Posted February 5, 2008 Author Share Posted February 5, 2008 With 4 modules I would suggest setting the memory frequency at DDR667 with those settings. thanks a lot Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 6, 2008 Corsair Employees Share Posted February 6, 2008 NP Please let me know how you make out! Link to comment Share on other sites More sharing options...
Botas1 Posted February 7, 2008 Author Share Posted February 7, 2008 NP Please let me know how you make out! I put the speed 667 mhz but i Think my system works better at 800 mhz, Do you think is gonna afect my computer....if i live it at 800 mhz? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 7, 2008 Corsair Employees Share Posted February 7, 2008 If the system is stable then do what you think is best it will not hurt them it might not be stable would be the only thing as long as you do not go over 2.1 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.