Jump to content
Corsair Community

Pass MemTest singlely - errors in Dual Channel


Recommended Posts

1) I have 2GB (TWIN2X2048-6400C4) of pc6400


Motherboard is MSI P6N Diamond


tested the sticks one by one in slot 1 using Memtest v1.7.


No errors on either stick.


I installed both, ran memtest, and came back to errors.


timings have been manually set 4-4-4-12 - 2.1volts as specified.


Any ideas?


2) I also have a pair of similar sticks from another manufacturer that I hope to mix them with. 4-4-4-4-12 - 2.2volts. Any known issues?


Thank you.

Link to comment
Share on other sites

  • Corsair Employees

First thing Max memory Voltage for these modules would be 2.1 Volts and I would not suggest mixing memory on any MB.

Second I have seen people reporting errors with memtest on this MB and I am not convinced its not a compatibility issue with the MB and memtest. To be sure I since you stated if I understood you correctly the system, seems to work in Windows I would try the Microsoft Memory Diagnostic and see if that gives errors.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...