wju652 Posted January 20, 2008 Share Posted January 20, 2008 Hi! I have a pair of CM2X1024A-6400 modules and decided to go for another set so i would get 4Gb, (4x 1Gb), and now i get all kinds of lockups, can´t get it to work even if i lower them to run in 667Mhz. So i´m wondering if i return these and buy 2X CM2X2048-6400 instead, so i would get just 2 modules but still 4Gb, would i be able to run these at the intended speed with more stability. regards. Link to comment Share on other sites More sharing options...
bigbuck08 Posted January 21, 2008 Share Posted January 21, 2008 Have just two modules would be alot better and yes you would be able to run them at the rated settings provided your MB supports them. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 22, 2008 Corsair Employees Share Posted January 22, 2008 When you add all four modules did you set the Memory Voltage to 2.0 Volts and set the NB/MCH Voltage to +.05 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.