TWIN2X2048-8500C5DF + Abit IX38 Quadgt

[Karas]

Hi there, I think I have a problem: I can't get the ram working at 1066Mhz O_o

 

I have the q6600 g0 processor, so: 266fsb (default fsb) @ 2:1.00 (1066mhz), manual latency 5-5-5-15-2T (other options auto), vdimm 2.1v.. it crashes with prime95 blend test.. on large fft (1024k)..

Or.. 266fsb, voltages auto, latency by SPD.. at 1066mhz bsod..

Or 266fsb, vdimm 2.1v, latency by SPD.. at 1066mhz.. bsod xD

..

 

I tryed many configurations.. like this one:

 

 

[b]ABIT IX38 QuadGT[/b]

[b]OC GURU:[/b]

CPU OPERATING SPEED................ - USER DEFINE
EXTERNAL CLOCK..................... -  266MHz 
MULTIPLIER FACTOR.................. - x 9 
ESTIMATED NEW CPU CLOCK.......... - 2394  MHz 
DRAM SPEED (CPU/DRAM)........... - DDR2-1064 (2:1.00) 
PCI EXPRESS CLOCK.................. - 105MHz 

[b]VOLTAGE CONTROL:[/b]

CPU CORE VOLTAGE................... - 1.3125V 
CPU Core Voltage Offset............ - 0V
Target CPU Core Voltage............ - 1.3125V
DDR2 VOLTAGE....................... - 2.100V 
CPU VTT VOLTAGE.................... - 1.20V 
MCH 1.25V VOLTAGE.................. - 1.35V 
ICH 1.05V VOLTAGE.................. - 1.05V 
ICHIO 1.5V VOLTAGE................. - 1.50V 
DDR2 REFERENCE VOLTAGE............. Default
CPU GTLREF 0+2..................... - 67%
CPU GTLREF 1+4..................... - 67%

[b]ADVANCED CHIPSET FEATURES:[/b]

DRAM TIMING SELECTABLE............. - MANUAL 
CAS LATENCY TIME (TCL)............... - 5
RAS TO CAS DELAY (TRCD)............. - 5 
RAS PRECHARGE (TRP)......... .......... - 5 
PRECHARGE DELAY (TRAS).............. - 15
REFRESH CYCLE TIME (TRFC)........... - 35
WRITE RECOVERY TIME (TWR)......... - 4 
WRITE TO READ DELAY (TWTR)........ - 4 
ACT TO ACT TIME (TRRD)............... - 4 
READ TO PRECHARGE (TRTP)............ - 12 
COMMAND RATE....................... - 2T 
PCIE Root Port Function............ - V1.0A 
PEG FORCE X1....................... - DISABLED 
INIT DISPLAY FIRST................. - PCIEX 

[b]ADVANCED BIOS FEATURES / CPU FEATURES:[/b]
THERMAL CONTROL.................. - DISABLED
C1E FUNCTION....................... - DISABLED 
EXECUTE DISABLE BIT................ - DISABLED 
VIRTUALISATION TECHNOLOGY.......... - DISABLED
EIST FUNCTION...................... - DISABLED  

 

http://img229.imageshack.us/img229/8497/wtfza3.th.png

 

Well nothing.. the best i could get is 333fsb @ 1:1.25 (ram at ~830mhz).. and I do have the 3 ram fans plugged in..

[Karas]

oh lol.. I think I found it... it's one module that's corrupted with that module alone I get a BSOD.. with the other one alone it works @ 1066mhz too...

 

RMA.. :)

 

But I have another question, It's possible to receive the new module while sending this one ? because I need 2gb, and I see there are a lot of problems with the pc2-8500 ram (stock side).. I mean.. i don't want to be with only 1gb for months O_o

 

thanks

 

EDIT: forgot, for RAM Guy (?), I have purchased the ram at digitec.ch an online swiss store, how does it works with the RMA ? i have to do it with the digitec shop, or with you directly ? becuse I live in switzerland, but at digitec.ch they say new ram comes the 2nd of february.. and another thing, I have to send both modules ?

 

I have a bad feeling (= PC off for weeks..) :P

[RAM GUY]

It may be easier for you to have the modules replaced by your reseller since you do not live in the U.S., however if you have any problems then please use the On Line RMA Request Form and we will be happy to replace them.