triptongue Posted January 17, 2008 Share Posted January 17, 2008 i have a system with asus p5n32 sli se deluxe, intel E6600, xfx 7900gt/gto 256mb, ocz ddr2 pc2 6400gold gx xtc dual channel with 5-5-5-12 (2 x 512mb) mobo bios 901 i want to update ram with TWIN2X2048-6400C4DHX. (2 x 1gb) as pair of dual channel.if i purchage those memory modules would it be able to work proper the system?meaning would they work with deafaults settings>(4-4-4-12 800mhz)and what s the best volts for the memory(1.9 -2- 2.1volt?) would i have crashing problems? pleaz help me i wouldn t like to make a mistake on this choice if they re not compatible which one you suggest ???? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 17, 2008 Corsair Employees Share Posted January 17, 2008 Yes they will run great in that MB but you cannot mix these modules and you would need to load setup defaults and then set the tested settings and Voltage manually Cas 4-4-4-12 at 2.1 Volts 2t CR/CPC TRC 24. Link to comment Share on other sites More sharing options...
triptongue Posted January 18, 2008 Author Share Posted January 18, 2008 Yes they will run great in that MB but you cannot mix these modules and you would need to load setup defaults and then set the tested settings and Voltage manually Cas 4-4-4-12 at 2.1 Volts 2t CR/CPC TRC 24.THANX RAM GURU! first i take the old ones out.i put the new ram.boot and enter bios.load setup dedfaults.and the next boot up enter bios and set the tested settings and voltage ?? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 18, 2008 Corsair Employees Share Posted January 18, 2008 Just load setup defaults after you install the modules and then set the tested settings and Voltage then reboot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.