Jump to content
Corsair Community

2x TWIN2X2048-6400C4DHX and P5N-E SLI


Recommended Posts

Hey guys, it's my first post here.


I am running 4x 1024 sticks(4x CM2X1024-6400C4DHX) on the Asus P5N-E Sli mainboard. I have tried to set manually the 4-4-4-12 configuration and to start vista. But at the vista loading screen I always get a blue screen...

So I tried it with 3x 1024 sticks and the same configuration and it is working fine...

With 4x 1024 sticks and the auto configuration it is also working, but i think the sticks don't run with full speed?





Edit:I have installed the newest bios update.

Link to comment
Share on other sites

ok, thank you!! but I still have problems with it! sometimes it's working and then on the next day I can't run vista at all with 4 sticks..

Here you can see what I have tried:

tCL 4

tRCD 4

tRP 4

tRAS 12

Command Per Clock Auto


and then I have tried following memory voltages:





and 2.178V I haven't tried yet, because it's over the 2.1V...


My CPU is a Intel Core 2 Quad Q6660 and the auto FSB is 1066,7!


Do you have any other ideas I could try?





Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...