markabell Posted January 15, 2008 Share Posted January 15, 2008 :eek:hi I run an ecs board, nforce4 a939 with a pair of cmx512-3200xlpt. I need to put in another 1 gb 2 x 512mb to keep dual channel 128 bit mode. The latency of my current pair are 2.2.2.5!! Should I put another pair of XL's in or would some cheaper C2PTs be ok latency 2.3.3.6, also I can get hold of a pair of LLPTs cheap, latency 2.3.2.6? Im confused!! Any help appreciated ladies & gentlemen :eek: Link to comment Share on other sites More sharing options...
Wired Posted January 15, 2008 Share Posted January 15, 2008 It's never recommended to mix different part numbers. XLs would be compatible of course, anything else would be a crapshoot. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 15, 2008 Corsair Employees Share Posted January 15, 2008 XMS3200XL modules are not manufactured any longer. It would be best to replace what you have now with one set of Twinx2048-3200C2 for best performance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.