hhammack Posted January 15, 2008 Share Posted January 15, 2008 I'd like to run two sets of the memory in the link below on this board with 64-bit Vista, but I constantly hear of problems with mobos not booting with 8GB. Will this be a problem? I can't imagine it would be as the board supports 8GB, but I'd like a second opinion. Two friends have this board and neither could get this board to boot with 8GB of memory, even after troubleshooting. http://www.newegg.com/Product/Product.aspx?Item=N82E16820145184 Thanks for any help! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 15, 2008 Corsair Employees Share Posted January 15, 2008 Should not be a problem, just make sure that you have the latest BIOS and then load setup defaults and set the NB/MCH Voltage to +.05 Volts should be all you need to do, but if it's not stable DDR667 would be suggested. Link to comment Share on other sites More sharing options...
hhammack Posted January 15, 2008 Author Share Posted January 15, 2008 Thanks a lot RAM GUY! All I needed to know.:): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 15, 2008 Corsair Employees Share Posted January 15, 2008 NP Please let us know how you make out! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.