AdrianG Posted January 6, 2008 Share Posted January 6, 2008 in your memory configurator there are two dg965wh motherboards listed. one has all the twinx memory and the other has memory clocked at 677 or lower. is that just a mistake? or did intel release a revision to the board? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 7, 2008 Corsair Employees Share Posted January 7, 2008 No that MB will not let you set the memory Voltage and will not support our XM2S modules. I will get the Admin to look at that and get it corrected ASAP. Link to comment Share on other sites More sharing options...
AdrianG Posted January 7, 2008 Author Share Posted January 7, 2008 http://www.corsair.com/configurator/product_results.aspx?id=11500 now the configurator says it supports a 4gb dual channel kit @ 800mhz, is this correct? if it is. are there any single 2gb sticks or 2gb dual channel kits at 800mhz that would work with my motherboard? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 7, 2008 Corsair Employees Share Posted January 7, 2008 No sorry there is not, however Twin2x2048-6400C5DHX are built with the same IC's as the 2 Gig modules but they are tested at 1.9 Volts So we cannot be 100% sure they will work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.