Devilan Posted January 6, 2008 Share Posted January 6, 2008 Hello, So i have 2x1Go ddr2 but one ram is faulty, i do many test and the ram is really faulty: i change slot, change voltage,test on other computer but a blue screen appear after logon session. It says : NOT_EQUAL_OR_LESS. Then my computer reboot. The other ram works correctly. If i send the ram , can i send juste the ram who is damaged or the 2 ram? Because I need my pc to work.It's a dual channel pack. Best Regards. Ps: sorry for my english because i'm belgian ;) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 7, 2008 Corsair Employees Share Posted January 7, 2008 Please make sure you have memory voltage set manually to 1.9 volts, and if you are still having issues then we will want to get the set replaced for you. Please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Devilan Posted January 8, 2008 Author Share Posted January 8, 2008 Hello, I test to set voltage manually to 1.9V but not result. When i send the ram can i just send the ram who is damaged no 2 ram please (set 2x1) ? Because I need the second ram who run perfectly whit 0 error whit memtest for 8hours. Best regards Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 8, 2008 Corsair Employees Share Posted January 8, 2008 These modules will be need to replaced as a set. This is to ensure you receive a matched pair in return and that there are no compatibility issues with a replacement module. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.