nathanll Posted January 5, 2008 Share Posted January 5, 2008 I was running a twin2x2048-5400c4 set. I wanted more RAM. I went to a local shop talked through with the guy there and he recommended twin2x1024-5400c4 to go up to 3GB total as if I went to 4GB Vista home would not recognize much past 3GB. So I bought a set. Now however I can not get the computer to POST with the 1GB set installed. Can you offer any suggestions? Thanks in advance. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 7, 2008 Corsair Employees Share Posted January 7, 2008 With 4 modules on that MB with that CPU I would set the memory frequency at DDR533 /266 MHz and set the memory Voltage to 2.0 Volts and just let the BIOS set the timings and see if that will post. Link to comment Share on other sites More sharing options...
nathanll Posted January 10, 2008 Author Share Posted January 10, 2008 Thanks managed to get it working :laughing: Had to up the voltage to 2.085V. Is there anyway I can get it to run at 667 MHz or 675Mhz, instead of 533? Thanks once again Nathan Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 10, 2008 Corsair Employees Share Posted January 10, 2008 Yes but you would most likely have to over clock the CPU. Link to comment Share on other sites More sharing options...
nathanll Posted January 11, 2008 Author Share Posted January 11, 2008 OK so what do you recommend, I have pushed the CPU to 2.4GHz stable before 266 FSB with a x9 multiplier. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 11, 2008 Corsair Employees Share Posted January 11, 2008 I am sorry I cannot tell you how to over clock, I would suggest checking some of the over clocking web sites for more help with how to over clock. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.