Jump to content
Corsair Community

TWIN2X4096-6400C5G & Asus P5N32-E SLI Plus


Recommended Posts

  • Corsair Employees

I would make sure that you have the latest BIOS and then load setup defaults and try these settings.

SLi ready: Disabled

Memory Voltage: 2.1v

NForce SPP Voltage: 1.5v

CPU FSB Voltage 1.4 (may be different for your specific CPU just add .01-.02 Volts)

TCL: 5


TRP: 5

TRAS: 15

Command Per Clock: 2

TRC: 24-28


If the system is not stable I would set the memory frequency at DDR667 but try it at DDR800 with these settings they may work just fine.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...